Dust Analyzer

Dust Analyzer

SB100

DUSTHUNTER SB100 - Dust meter based on the scattered light measurement principle
SB100
  • Description
    SICKAG


    The DUSTHUNTER SB100 is an EN 15267 certified dust analyzer for measuring low to high concentrations, in difficult applications such as hot corrosive gases. The measurement is based on the scattered light measurement principle. The measurement is mounted on one side of the flue without requiring a so-called light trap on the other side, through automatic compensation of background light. Standard equipped with automatic checking of zero and reference points, as well as monitoring of possible contamination.

    Downloads

  • Characteristics
    • For very small to medium large dust concentrations
    • Mounting on one side
    • Pollution check
    • Automatic check zero and reference point
    • Automatic compensation of the background radiation so that no light absorber is required
    • For medium to large channel diameters
  • Benefits
    • Type approval according to: EN15267-3 <> 2001/80 / EC and 200/76 / EC (read BVA / QAL applicable)
    • Easy installation, commissioning and operation
    • Measurement independent of gas velocity, moisture and dust load
    • Low maintenance thanks to self-monitoring
  • Applications
    • Emission control in power plants and waste incinerators
    • Control of dust concentrations behind filter installations
    • Check for dust concentrations in working halls
    • Control of fresh air supply and extraction systems

SP100

DUSTHUNTER SP100 - Approved dust gauge with measuring probe
SP100
  • Description
    SICKAG


    The DUSTHUNTER SP100 is a suitability tested measuring instrument with measuring probe for detecting very small to medium dust concentrations. The device is also ideal for thick and double-walled pipes, because the assembly takes place on one side of the channel. The measuring method is based on the principle of forward light scattering. The device is equipped with an integrated automatic control of the zero and reference point and also registers if necessary. pollution.

  • Characteristics
    • Mounting on one side
    • For very small to medium large dust concentrations
    • Automatic check zero and reference point
    • Pollution check
    • Available with Hastelloy lance for corrosive gases
    • For small to medium size diameters
  • Benefits
    • Type approval according to: EN15267-3 <> 2001/80 / EC and 200/76 / EC (read BVA / QAL applicable)
    • Ideal for thick and double-walled pipes
    • Low maintenance due to self-monitoring and pollution control
    • Fast installation, because adjustment is not necessary
  • Applications
    • Emission control in power plants and waste incinerators
    • Control of filter installations
    • Measurements in drainage channels
Dust and Opacity Analyzer

Dust and Opacity Analyzer

T100

DUSTHUNTER T100 - The modular transmission dust meters
T100
  • Description
    SICKAG


    The modular transmission dust gauges DUSTHUNTER T with the configurations T100 and T200 are dust analyzers for medium to high concentrations of dust in gases, above the dew point. The basis for the measured value is the transmission. From the transmission value the opacity and the extinction can then be calculated, as well as the dust concentration after a gravimetric calibration. The DUSTHUNTER T100 uncludes an automatic contamination measurement and correction function. It provides users with an early warning should the contamination level on the measurement optics exceed the permitted limit.

    Downloads

  • Characteristics
    • For medium to high dust concentrations
    • Integrated pollution control
    • Automatic check zero and reference point
    • For small to large measuring distances
  • Benefits
    • Tested for suitability in accordance with EN 15267
    • Easy installation, commissioning and operation
    • Measurement independent of gas velocity, moisture and dust load
    • Low maintenance thanks to self-monitoring
  • Applications
    • Emission control in power plants and waste incinerators
    • Control of filter installations
    • Check for dust concentrations in working halls
    • Control of fresh air and extraction systems

T200

DUSTHUNTER T200
T200
  • Description
    SICKAG


    The modular transmission dust gauges DUSTHUNTER T with the configurations T100 and T200 are dust analyzers for medium to high concentrations of dust in gases, above the dew point. The basis for the measured value is the transmission. From the transmission value the opacity and the extinction can then be calculated, as well as the dust concentration after a gravimetric calibration. The DUSTHUNTER T200 is also equipped with an automatic self-alignment function for the optics: a unique feature only available in SICK products. It corrects any distortion on the optical axis that may occur as a result of the thermal expansion of the stack. Both functions reduce excessive maintenance cycles. The automatic self-alignment function also makes it easier to commission the device.

    Downloads

  • Characteristics
    • Integrated pollution control for transceiver unit and reflector unit
    • Automatic self-alignment of the optical components
    • Automatic check zero and reference point
    • For medium to high dust concentrations
    • For small to large measuring distances
  • Benefits
    • Tested for suitability in accordance with EN 15267
    • Easy installation, commissioning and operation
    • Measurement independent of gas velocity, moisture and dust load
    • Low maintenance thanks to self-monitoring
  • Applications
    • Emission control in power plants and waste incinerators
    • Control of filter installations
    • Check for dust concentrations in working halls
    • Control of fresh air and extraction systems
Gas Analyzer

Gas Analyzer

GM32

GM32 - Measuring aggressive gases quickly and directly, even in potentially explosive atmospheres
GM32
  • Description
    SICKAG


    The GM32 in-situ gas analyzer measures gases such as: SO2, NO, NO2 and NH3, but also the pressure and temperature in the gas pipeline - directly, quickly and without gas samples and transport. With this analyzer your process systems have measured values in real time. Thanks to the self-monitoring you get reliable measurement results at any time. And in the event of malfunctions, a warning will appear in good time.

    For an emission measurement of SO2 and NO, the GM32 has been tested for suitability in accordance with the new European standard EN 15267-3.

  • Characteristics
    • Fast and direct in situ measurement
    • No gas extraction, no gas transport, no gas treatment
    • Max. eight parameters, plus process temperature and pressure
    • DOAS and CDE evaluation procedures
    • Several independent measuring ranges with the same accuracy
    • Automatic self-test function (QAL3) without test gas
    • Execution in overpressure for ex zone 1 and 2
  • Benefits
    • Realistic measurement values in real time without change in the composition of the gas
    • Short process fluctuations are immediately detected
    • Representative measurement by choice between cross-duct or version with measuring lance
    • Faster service on site thanks to modular design
    • Long maintenance-free intervals
    • Cheap in situ gas analyzer - also in ex version
    • Low installation and sub-housing costs, no test gas required
    • Complete overview of emissions during processing of pulp (kraft process) thanks to simultaneous measurement of TRS components plus SO2, NO, NH3
  • Applications
    • Control for flue gas purification
    • In desulfurization and denitrification factories, washers and converters
    • Emission measurement in accordance with EU directives or local regulations
    • Control of process parameters in Claus factories
    • Control of landfill gases
    • Control in ammonia production

Sidor Multi Gas analyzer

SIDOR
  • Description
    SICKAG


    The SIDOR is a gas analyzer for measuring up to 2 infrared components. In addition, the device can be expanded with an internal electrochemical or paramagnetic measuring cell for oxygen measurement. An essential feature is the semi-annual maintenance interval with test gases. Thanks to the stability of the measuring chambers, the system can be adapted for inert gas and / or ambient air within this six-month period. A pressure compensation for the measuring gas is included as standard. The SIDOR is TÜV approved for large combustion plants and crematoria.

  • Characteristics
    • Automatic zeroing with ambient air or N2.
    • Calibration with calibration gas is only required once a year.
    • Standard equipped with pbaro correction.19 "rack housing, ideal for standard applications in combination with our analysis housing .
    • Very stable detector
    • O2 measurement, paramagnetic or electrochemical
    • Automatic adaptation to component-free ambient air
    • Insensitive to dust and dirt
  • Benefits
    • Approved according to EN14181
    • TÜV suitability test and MCERTS certification according to EN 15267
    • Favourable price
    • Excellent cross-sensitivity specifications.
    • Minimum service, and maintenance work as well as a simple upgrade of existing installations thanks to the modular design
    • Influence of the ambient temperature is nil due to temperature-controlled measuring modules
    • Reliable measurement results through proven measurement techniques
    • Automatic setting afterwards, self-monitoring and fault diagnosis
    • Only semi-annual inspection with test gas is required
    • Long service intervals
    • In many cases to repair locally
    • Replacement of components without cumbersome temperature settings


    The Sidor gas analyzer complies with NEN-EN 14181 QAL1. It is applicable for installations that have to comply with the requirements of the Industrial Emissions Directive.

  • Applications
    • Power plants
    • Chemical industry
    • Incineration plants
    • Refineries
    • Cement industry
    • Iron ore and steel industry
    • Paper industry

Get a quotation

Contact Us

Ecos Link Solutions Sdn Bhd
A-05-03A, Block Allamanda, 10 Boulevard,
Lebuhraya SPRINT, PJU 6A, 47400
Petaling Jaya, Selangor Malaysia.

Office: +603-7726 2985
Phone: +6012-335 9369
Fax: +603-7726 1572
Email: info@ecolinksolutions.com